검색 상세

발 형태별 한국무용 슈즈구조에 따른 발 디딤 시 압력분포의 차이

Differences in plantar pressure distribution during Didim according to the structure of Korean dance shoes by foot type

초록/요약

본 연구의 목적은 발 형태별 한국무용 슈즈구조에 따른 발 디딤 시 압력분포의 차이를 분석하는 것이다. 실험참여자는 한국무용 전공하는 대학생 중 정상족(10명)과 편평족(10명), 요족(10명)을 가진 총 30명이다. 독립변인은 발 형태와 한국무용 슈즈의 종류(구조)이며, 종속변인은 한국무용 디딤 동작 시 발바닥 부위별 압력분포이다. 슈즈 종류는 버선, 굽 슈즈, 그리고 뒤꿈치, 내측 족궁과 중족골 지지대를 포함하여 자체 제작한개발슈즈 세 가지이다. 압력분포 측정기(EMED-LE System, Germany)를 이용하여 발바닥 압력을 측정하였고, 오른발 발바닥의 후족, 중족, 전족, 발가락의 4부위로 구분하였다. 자료처리는 Window용 SPSS 22.0를 이용하여 비모수 반복측정 프리드만(Friedman)을, 집단 내 검정으로 윌콕슨의 부호순위 검정(Wilcox singned rank test)을 실시하였고, 유의수준은 p<.05로 하였다. 발 형태에 따른 발바닥 부위별 최대압력은, 정상족이 요족이나 편평족 보다 낮았다. 특히 후족, 전족, 발가락에서 최대압력이 유의하게 낮았다. 슈즈의 종류별로는 굽슈즈가 버선이나 개발슈즈보다 부위별 최대 압력이 유의하게 높았다. 정상족은 굽슈즈를 착용했을 때 중족, 전족에서 최대압력이 높았다. 반면 개발슈즈는 전족의 압력을 낮추고, 발가락에서는 압력을 높이는 효과가 있었고, 전족과 발가락의 압력이 비슷하여 전족에서 얻어진 추진력을 발가락까지 유지시키고 있었다. 버선은발 형태와 상관없이 후족, 중족, 전족의 압력은 낮으면서 발가락 압력은 높아, 개발 슈즈와 함께 디딤에 도움이 되는 슈즈라고 할 수 있다. 본 연구의 결과는 슈즈로 인한 발 변형과 손상을 예방하여 무용수의 기능향상에 도움을 줌은 물론 한국무용 슈즈 개발을 위한 기초자료로 유용할 것이다.

more

초록/요약

The purpose of this study was to analyze the difference in pressure distribution during Didim according to the structure of Korean dance shoes by foot type. The subjects were a total of 30 right-handed college students majoring in Korean dance, including the pes rectus (10), pes planus (10), and pes cavus (10). The independent variable was the shape of the foot and the type (structure) of the Korean dance shoes, and the dependent variable was the plantar pressure distribution during the Didim in Korean dance. The types of shoes were beoseon, heel shoes, and self-produced shoes by supplementing three parts of the heel, medial arch, and metatarsal support. Plantar pressure distribution was measured using a EMED-LE System (Germany), and the sole was divided into 4 parts and analyzed.the: hindfoot, midfoot, forefoot and toe. For data processing, the nonparametric repeated measurement Friedman was performed using SPSS 22.0 for Windows, and the Wilcox singned rank test was performed as an intra-group test, and the significance level was set to p<.05. The maximum pressure of each sole part according to the shape of the foot was lower in the normal foot(pes rectus) than in the pes cavus or pes planus. In particular, the maximum pressure was significantly lower in the hind, forefoot, and toes. By type of shoe, heeled shoes had significantly higher maximum pressure for each part than beoseon or developed shoes. The peak pressure was high in the middle and forefoot when wearing heel shoes. On the other hand, the development shoes had the effect of lowering the pressure on the forefoot and increasing the pressure on the toe, and maintaining the driving force obtained from the forefoot up to the toe because the pressure on the forefoot and toe were similar. Regardless of the shape of the foot, the beoseon have low pressure on the hind, middle, and forefoot while the toe pressure was high, so it can be said that it is useful for Didim along with the development shoes. The results of this study will not only help improve dancers' function by preventing foot deformation and damage caused by shoes, but will also be useful as basic data for the development of Korean dance shoes.

more